What Does a Speedohealer Do for a 2004 Gsxr 1000 Speedometer Not Reading Speed
SpeedoHealer v4
No matter what sprockets or tire size you employ, the SpeedoHealer v4 will deliver precise readings to your meters. Don't let uncalibrated readings ruin your fun and dethrone your cycle's resale value. Get your fix today!
Highlights
Calibrate your cycle'due south speedometer to get 100% accurate reading – fifty-fifty with the nearly radical sprocket swaps!
Convert Km/h to MPH or vice versa on import vehicles or during your trip abroad.
Recollect your truthful acme speed to your manufactory speedometer past the printing of a push.
Introduction
On nigh motorcycles the factory speedometer error tin be as high equally 10%. And then even a small gearing change can take the speedometer off by fifteen%. Changing the sprockets or tires will also result in college odometer reading, decreasing the bike'south resale value without valid reason. The SpeedoHealer is an affordable, convenient and very simple way to sort these speedo and odo bug. Uniform with all motorcycles, ATVs/UTVs with non cable driven speedometer. Get your fix today – You won't notice any meliorate alternative on the market! The SpeedoHealer is the nigh popular and most reliable calibrator in the world – best-selling by thousands of happy customers worldwide.
Note: The new SpeedoHealer TSD has the ability to remove the top speed limiter on certain vehicles for racing purposes, including: CBR1000RR, VFR800X, VFR1200F, ZX-10R, ZX-12R, ZX-fourteen, FZ-09, MT-09, R1, V-Max, Can-Am, Kawasaki, Polaris ATVs and many more than.
Well-nigh the SpeedoHealer
Easy to apply User Interface
Easy to program, review and update the stored parameters.
Extended calibration range
-99.9% to +9999.9% in steps of 0.1% Which means the signal tin can be adjusted from 1/one thousand to x100, in increments of 0.001. This range is efficient even for the most radical gearing changes and suitable for all kind of custom applications every bit well.
Improved superlative speed
Can be used to remove the acme speed limiter of the speed restricted motorcycles and ATVs e.g. from Honda, Kawasaki, Yamaha, Tin can-Am.
Detachable remote push
The SpeedoHealer comes with a detachable remote button as standard for the Top Speed Recall feature.
Supreme compatibility
Compatible with most motorcycles, ATVs/UTVs. Plug 'north Become harness kits are available for most models. Compatible with all our products besides.
Dual-banking company retentivity
Shop two contained calibration values and switch between them by the press of a button. There is a articulate, visual confirmation of the active bank and value in use. Useful for road & track setting when changing gearing or running dissimilar sized wheels/tires.
Display unit conversion
Alter from Km/h to MPH and vice versa by the printing of a button.
Interactive test mode
Confirm installation before accept off.
Compact dimensions
xxx% smaller and lighter unit of measurement compared to SHv3. Full SMD pattern. The smallest and lightest total featured calibrator ever congenital.
Broad operating voltage range
Works from as low as 3V supply voltage up to 19V. Ways even easier installation for all Yamaha bikes and some other models. Reduced power consumption and auto stand-by.
Loftier-speed CPU
32-bit processing ensures loftier accuracy and immediate response to the input betoken with no lag.
Robust design
100% weatherproof. Every unit is fully tested, guaranteed to work. All leads are protected confronting reverse voltage, short circuits and high energy transients.
The SpeedoHealer TSD model has a Top Speed De-restrictor characteristic. Information technology is inactive past default. You may actuate this feature merely for racing purposes on closed tracks, entirely at your own risk. It must not be used on public roads!
This unit tin exist configured to avoid the top speed restriction on motorcycles and ATVs which have a top-speed limitation based on the speed indicate (such as the CBR1000RR, VFR800X, GL1800, VFR1200F, ZX-10R, ZX-12R, ZX-14, FZ-09, MT-09, YZF-R1, Five-Max, Can-Am, Kawasaki, Polaris ATVs and many more than).
You can set the TSD unit to either 'freeze' the speed signal to the ECU at a specific threshold, or employ a stronger calibration value and so that the speed signal will be increased at a slower rate to a higher place the set threshold.
The SH-V4-TSD unit of measurement is compatible with all SH-V4 Harness kits.
The divergence betwixt the standard SH-V4 and SH-V4-AB is that the standard model has a remote push for top speed recall, while the AB model has a remote switch which allows INSTANT switching (even while riding) between the A and B memory banks.
The SH-V4-AB unit is compatible with all SH-V4 Harness kits.
These modules have the verbal same features as the standard SH-V4 module but work with different speed sensor type. Our Production
Advisor shows the exact part numbers you need for your bike.
Those motorcycles for which we list the SH-V4-C or SH-V4-2WA modules, can not use the SH-V4, SH-V4-TSD or SH-V4-AB modules.
TThis SpeedoHealer model is suited for vehicles with 2-wire anterior sensor.
If you are not certain about compatibility, delight contact us.
This model is compatible with the SH-Y06 harness kit only.
Attention!
EU countries ›
SpeedoHealer V4 › 79,00 EUR
SpeedoHealer V4-2WA version › 79,00 EUR
SpeedoHealer V4-C version › 79,00 EUR
SpeedoHealer V4-AB / TSD version› 84,00 EUR
SpeedoHealer V4-2W version › 84,00 EUR
SpeedoHealer V4A version › 93,00 EUR
USA and other regions ›
SpeedoHealer V4 › $109.00
SpeedoHealer V4-2WA version › $109.00
SpeedoHealer V4-C version › $109.00
SpeedoHealer V4-AB / TSD version› $115.99
SpeedoHealer V4-2W version › $115.99
SpeedoHealer V4A version › $99.00
Warranty:
30-twenty-four hour period money dorsum guarantee and 2-twelvemonth replacement warranty from the date of purchase (invoice copy required)
Size: fifty x 30 10 17mm (1.9 x 1.ii 10 0.half-dozen inches)
Weight: 38g (1.34oz)
You need to remove a side fairing or rising the fuel tank to proceeds access to the speed sensor coupler. If you lot can do that, the residual is quick and easy. Carve up the speed sensor coupler and plug-in the SH harness connectors.
All our SH Harness Kits are true Plug-n-Get type, except the followings:
– SH-U01: This is an universal harness kit. 4 wires have to be spliced to the speed sensor wires (Power, Ground, Signal In and Out). All connections can be washed at 1 place, near the sensor.
– SH-K05: Plug-in install, merely you need to splice one connection.
Which vehicles is the Speedo Healer compatible with?
All bikes, ATVs, cars, vans, trucks and snowmobiles which have 3-wire speed sensor or ii-wire ground switch sensor.
BMW motorcycles use two-wire inductive sensor which the SH-V4 is not compatible with. However, we can make custom unit on special order. Please contact us.
My speedometer is analog, will the SH work with it?
Aye, the SH works with both analog (rotating needle) and digital (LCD read-out) speedometers. However, the speedometer must exist electronic.
How tin I tell whether my speedometer is electronic or not?
It is electronic, if there is no driving cable going to the dorsum of the dashboard (commonly from the front wheel) just electric wires. All modern motorcycles take electronic speedometer.
Will the SH calibrate both my speedo and odometer?
Yeah, only it is not possible to calibrate them separately, equally one speed signal drives both the speedometer and the odometer.
On most bikes, if the speedo is calibrated to be 100% accurate, the odo will register slightly less miles. While this can be annoying in sure situations, one can ever calculate the real altitude easily after a long trip.
Alternatively, of class, you tin get the factory default indications regardless of the used gearing: accurate odometer and slightly optimistic speedo.
Will the SH fix my speedometer in the unabridged range?
Very probable, every bit all modern motorcycle speedos accept none, or very little linearity mistake. If you wish, you tin can check the linearity error of the speedometer by using the SH in Test mode.
I use a different re-calibrator on my CBR600F4i and the speedometer jumps up and downwardly by 1-3 mph at steady speed. Volition your SH be improve?
Admittedly. The SH uses 32bit real-time arithmetics and 0.001 correction steps , therefore it won't crusade any side-effects.
I use a different recalibrator on my GSX-R1000 and at very low speed, the speedo-meter stays at nil or jumps around.
Unlike the SH, other calibrators simply practise not bulldoze the speedo beneath a sure frequency. With the SpeedHealer, there is NO speedo lag, even on takeoff.
In what regard is the SH the best among the competitive products?
› Widest calibration range along with the finest increments
› Widest in- and output frequency range
› The most accurate calibrator
› Superlative Speed Memory function included
› Mile and kilometer conversion without any impact to the selected scale value
› Quick and easy prepare-up through the on-line figurer, no demand for math and special wait-up tabular array
› Plug-n-Go Kits are available for Japanese bikes
› The selected values tin can not be changed unintentionally
› Smallest power consumption
› All leads are protected confronting improper installation and noisy signals
› Compact and robust design, 100% weather condition proof
› Detailed documentation and first-class customer support
› The all-time value for money
I disconnected the SH/removed the battery, practice I demand to plan the SH over again?
No, the SH retains the settings even if you disconnect information technology. The values are stored in Wink memory. Your SH-V4 volition always brandish the calibration value in use whenever the ignition fundamental is turned on.
I inverse the front/rear sprocket on my bike and my speedo reads the same at a given rpm. And so do I have more than speedo mistake?
Yes. The speed sensor is reading the revolution of the countershaft, therefore the speedo vs tacho readings volition always exist the aforementioned. However, with a shorter sprocket ratio, higher rpm is needed for the same actual speed, i.e. the speedo error is increased.
Tin I buy another SH box or a Harness kit separately?
Yes. Delight contact the distributor in your country.
I have a GPS unit of measurement (or a Bike Estimator) installed on my motorcycle, is in that location whatever reason to install an SH?
Yes:
› GPS receivers and Wheel Reckoner have a huge lag, therefore can't show the existent momentary speed. The sensors of wheel computers send just 1 pulse per wheel revolution while the wheel's original speed sensors tin ship over 80.
› When your odometer shows more than mileage than the actual, you pay for it when y'all sell the bike.
› If the vehicle is equipped with fuel consumption meter, tiptop speed, average speed or other extended functionality, having the speed signal calibrated becomes even more important.
› Reading from the small bike computer screen can be hard and unsafe, peculiarly at high speeds or depression light conditions.
How can I utilize the Superlative Speed Memory (TSM) recall part and how does it piece of work?
Press and release the remote button. The top speed is shown on the speedometer for a few seconds, fifty-fifty if the bike is in motion. Proceed the button depressed for at least 2 seconds to reset the TSM. Notes:
› The TSM retains its value fifty-fifty if the ignition is switched off or the unit is disconnected.
› The TSM function is disabled in Transparent way, i.e. the unit of measurement has to be programmed first (only on SHv3 and earlier).
› The odometer ever registers proportional to the indicated speed.
If I enable the "km/h to mph" conversion way, will my LCD read in mph?
The indicated speed and distance travelled will be converted, but the displayed units of measure out (km/h and km) won't be changed.
I have an Acumen/Datatool Gear Indicator installed. Tin it be used together with your product?
Yes, the SpeedoHealer can be used together with whatever aftermarket products. We recommend connecting the gear indicator between the speed sensor and SH white wire.
Will the SH remove the speed limiter of my bike (ZX10, ZX12, ZX14, YZF-R1)?
By calibrating your speedometer that has e.1000. +8% manufactory speedometer error, the limit signal volition be raised by 8% as well. Unremarkably it ways that the limit point will never be reached.
If your bike has been tuned for extreme top speed, use the dual-bank retentivity characteristic of the SH-V4. E.m. when riding a ZX14 on the street, select -7% to have an accurate speedo, and switch to -90% if you wish to try a 200+ mph run on the rail. Switching betwixt A-B memory banks is every bit simple equally pressing a button.
Note: The SH does not affect the speed limiter on Suzuki motorcycles with gear position sensor (you need a GIpro due west/ATRE or X-TRE to by-laissez passer the limiter on Suzukis).
Important: The supplied instructions should e'er be followed carefully.
Video reviews
Customer feedback
Thanks for your assistance. The recalibration is done and the product works great. I used my GPS to perfectly adjust my speedo. Now it is right on the $. Thank you for such a great product.
Awesome Production!!! I cannot stress how skillful the Speedo healer is. When I first purchased it, I really did doubt it's integrity. I thought information technology would be a complete waste of money. How foolish was I! After doing a few runs with my GPS before fitting, I calculated the correction rate, fitted the Speedo healer and programmed it. I then took the bike for a ride with the GPS and was admittedly stunned at how accurate it was. What an crawly piece of kit, an absolute must for anyone with sprocket or tyre mods etc! Cheers then much Healtech, keep upwardly the great work!
This speedo re-calibrator is an absolutely astonishing tool – keen for bike kit cars.
It was so piece of cake! I established the mistake with my Garmin 295, used your online calculator, and bingo. System was besides verified with GPS. Thank you for a great product!!!
Hey, I just bought my speedohealer and installed information technology on my 01 R6. Thanks for making such a great product!
Dyno run was perfect, the dealer was impressed, 50 at fifty, 100 at 100 and then on to 200 kms. I am very happy, thanks for you help, a great production!!!!
I have your product on my motorcycle and L O V E it !
my 2008 haybausa with gps installed read 56 when the Speedo read 60.. at 100 I was really going 91. at 180 I was really going 165.
the speedohealer was straight forrard, easy to install and program. my speedometer is now accurate & coincides perfectly with my gps. cheers for such a wonderful product.
I am very happy with your production. I had a $22,000 bicycle with a five% error on the speedometer and it bothered the heck out of me being an anal engineer and all. After a 400 mile weekend your speedohealer now has my Goldwing speedometer "right on".
I have a K&N air filter, Yoshi sideslip-ons, and I've toured the bike and dragged it, and love it. When I was subsequently a little more I cog changed, and that's when I fitted up your speedohealer. The ease of fitment, the ease of operation and the accurateness of the unit is splendid. It'southward made a cog change a far easier prospect to exercise without fear of losing a license or cash, peace of mind.
Installed your product on my 1300R VTX the day after I received it… what a difference it makes. The speedometer is right on the money at all speeds and I couldn't be happier.
Simply installed SH-V4 + SH-S01 on my 2008 Suzuki Burgman 650 Executive. I am happy to report that using a scale setting of -viii.5% produces a completely linear accurateness reading from i mph to lxx mph in my testing using a Garmin Zumo 660 GPS as a reference speed indicator. I was expecting to have some inaccuracy either at low end speed or upper cease speed but accept found the speedohealer dead accurate throughout the range. Thanks for making a peachy product.
I purchased and installed one of your Speedohealers, MUCH better production over the YellowBox.
I really love the speedohealer very much. You guys take a great product that is well put together and very professional.
I ordered the SpeedoHealer for my Kawasaki ZX10R with the factory wiring kit. Very squeamish, the unit works dandy.
I would just like to say cheers for making such a dandy product! I accept a 1998 cbr 900rr which I put in a motor from a 1996 model. The speedometer was off by a huge amount 60 mph bodily speed showed up on the speedo as only 10 mph! I was unsure about which model to get the DRD or the SpeedoHealer and boy did I brand the correct selection. Information technology took longer for me to lookout the instructional video on the DRD than information technology did to consummate the SH install on my bike and ride down the road. My speedometer is dead on now according to my gps. One time once again thank you lot for such an crawly product.
Hello, merely wanted to let you lot know that i accept merely fitted your Speedohealer to my 05 Honda SP2 later i changed the gearing. Speedo was way out, but after fitting your Healer it is 100% spot on. Very Easy to fit, excellent website, more than than impressed.
franklinsominever.blogspot.com
Source: https://www.healtech-electronics.com/products/sh/
0 Response to "What Does a Speedohealer Do for a 2004 Gsxr 1000 Speedometer Not Reading Speed"
Post a Comment